Diy Irrigation Systems

While most home owners think that irrigation systems have to be really complex systems that need professionals to install there are easy do-it-yourself tips that they can use to install their own irrigation systems. Irrigation systems can be as complex as installing underground systems or as simple as using a soaker hose pipe. Diy setups normally depend on the space that needs irrigation, winter temperatures and the type of soil around the area. Complex watering systems do not need to be costly; they can easily be installed just like other simple systems. The setups can either be above or beneath the ground.

Underground systems can be easily installed in areas that do not have high rock content and those that have heavy clay soils since such soils make it difficult to dig and place irrigation systems. The areas need above the ground systems. Areas that experience extremely harsh winters require removable irrigation systems such as the trench or hose systems installed so as to avoid damage from freezing. Visit this site if you’re looking for a quality suppliers of steel pipe and irrigation supplies.

The simplest diy irrigation system is the use of soaker hoses. They are ideal for small areas that do not require irrigation pumps installed. The soaker hoses are normally perforated to allow water to slowly escape through the pipes. Gardens making use of regular garden hoses can use the method by making holes along the hose pipe and allowing water to drip through the holes. The facets can be partially turned on to avoid creating excess pressure, thus forming a fountain effect.

Another simple diy system is by installing water pipes beneath or above the ground. The method allows a more permanent installation of an irrigation system than the previous one as PVC pipes are used instead of hose pipes. PVC pipes are preferred to other types of pipes such as the steel pipes since they are light in weight and are easier to work with. The system should also be drained before cold weather to avoid damage from freezing. Where PVC pipes are being installed above the ground more holes should be drilled as well as a hose pipe attached on one end.

If installed below the ground, however the system will require tees that help raise the system slightly above ground level. Holes drilled above such tees should be coated with a screening material to avoid any particles entering the holes. A home owner can install sprinkler heads to the PVC irrigation system and add a timer or pump spare parts to the system. While it may result into the system becoming more complex it is an important feature to regulate the amount of water being used.

Though it may be an old diy irrigation system it is still viable. The system requires shallow trenches to be dug into the ground close to plants that need watering. The trenches also known as furrows are then flooded with water, which soaks the ground and reaches the roots of the plants. The system does not allow water wastage as in other irrigation systems such as the spray or sprinkler system.

Comments are closed.